Industrial Ultrasonic Coating System

 

Industrial Ultrasonic Coating System

Coating uniformity: > 95%

 

Non-clogging ultrasonic nozzle technology reduces maintenance cost and down-time

 

Continuous liquid delivery in 24 hours

 

Utilization rate of raw materials is more than 85%

 

XYZ three-axis servo motion system and motion controller to optimize spray patterns

 

Optional built-in syringe pump reduces required volume of coating material

 

Vacuum heating plate, suitable for flexible substrates

 

OVERVIEW

Industrial ultrasonic coating system is a medium-sized ultrasonic spray coating machine, which is usually equipped with WideMist, ConeMist or FocusMist ultrasonic nozzle, and also can be equipped with multiple nozzles in parallel to increase production rate. The Industrial ultrasonic coating system is also equipped with a unique precision continuous metering pump system, which is able to provide stable liquid delivery in 24 hours. Configured with other auxiliary devices such as carrier gas control, heating plate, vacuum plate and exhaust system, industrial ultrasonic coating system is very suitable for pilot scale or small batch production. Ultrasonic coating is precision spray coating technique based on ultrasonic atomizing nozzle technology. Compared with the traditional air spray coating, ultrasonic spray coating has advantages of higher uniformity, thinner coating thickness and higher accuracy. At the same time, since the ultrasonic nozzle can atomize liquid without the assistance of air pressure, the ultrasonic coating can greatly reduce the splashing, thus significantly reducing the waste of coating material. The utilization rate of the ultrasonic spray coating is more than 4 times that of the traditional air spray coating.

 

Siansonic industrial ultrasonic coating system is used for various of applications on thin film coatings deposition such as catalyst coated membrane (CCM) for fuel cell, functional layers for thin-film solar cell, functional layers for biosensors and microfluidic chips, photoresist coatings for silicon wafers, anti-reflection (AR) coatings, hydrophilic coatings, hydrophobic coatings, thermal insulation coatings, transparent conductive coatings, etc.

 

Features of Siansonic industrial spray coating system:

 

Non-clogging ultrasonic nozzle technology, low maintenance cost

 

Patented full digital ultrasonic generator, 4 CPUs provide high stable operation of nozzle. Control step size: 0.01W

 

Uniformity: >95%

 

Thickness of coating: 20nm-100 micron (Depends on material)

 

High transfer efficiency of coating material, the usage ratio can be higher than 85%.

 

XYZ servo motion system

 

Equipped with high-performance motion controller, compared with traditional PLC, motion pattern of nozzle is optimized, and the utilization rate of raw materials is further improved.

 

Continuous syringe pump system provides stable liquid delivery for 24 hours

 

Maximum coating area: 600x600mm

 

Max liquid viscosity: 20-30cps

 

Max solid particle size in suspensions: 10-20micron

 

Full-color touch screen and friendly user interface.

 

Precision air pressure control: keep carrier gas stable and adjustable

 

Built-in or external syringe pump provides precision liquid delivery

 

Exhaust system included

 

Laser light alignment: assist users fast locating the nozzle position

 

 

Siansonic provides ultrasonic oscillator, air bubble detector, ultrasonic bubble detector, etc. For more information, please feel free to contact us!

评论

发表评论

此博客中的热门博文

Photoresist Coatings For Semiconductor

图片
Ultrasonic Coating of Photoresist for MEMs, Wafers and Other Substrates with Various Topographies   Compared with traditional coating processes such as spin coating and dip coating, Siansonic ultrasonic coating technology for deposition of photoresist coating onto semiconductors has the advantages of high uniformity, excellence coverage of microstructure and controllable coating area. In the past 10 years, it has been fully proved that the photoresist coating on the surface of 3D microstructure by ultrasonic coating technology is significantly higher than the traditional spin coating process in terms of encapsulation and uniformity of microstructure. Siansonic ultrasonic coating systems can be used for surface coatings of planar and 3D structural substrates including silicon wafer, glass, ceramics, metal and other materials. Typical photoresist coating applications include silicon wafers, MEMS, lens, microfluidic chips, filters, etc. Ultrasonic coating is a simple, effective, economica
阅读全文

PZT Piezoelectric Ceramic Transducer For Sale

图片
PZT piezoelectric ceramics from Siansonic ceramic transducer manufacturer, can be made in various shapes and sizes from 1mm to 200mm. We also provide various electrode and metallization options such as silver, nickel, titanium alloys, gold, etc. The piezoelectric ceramic disc transducer are especially applicable to ultrasonic applications with wide frequency rage from kilohertz to megahertz scale. Inquiry PZT piezoelectric ceramics for sale !   Ten Manufacturing Processes from Siansonic Piezo Ceramic Transducer Manufacturer Siansonic is a renowned piezo ceramic transducer manufacturer that specializes in providing high-quality manufacturing processes. Here is a summary of ten of their manufacturing processes:   Mixing Grinding Pre-sintering Milling Spray drying Sintering Lapping Grinding Electrode plating Polarization, etc.   Through these manufacturing processes, Siansonic demonstrates their commitment to producing high-quality piezo ceramic transducers that meet the diverse needs of
阅读全文

Product Center

图片
Nano Ultrasonic Aerosol Generator   For Pyrolysis Siansonic Nano Ultrasonic Aerosol Generator For Pyrolysis Nano ultrasonic aerosol generator is an ultrasonic atomization device for ultra-fine atomized droplets generation. The mean diameter of atomized droplets can be only around 0.5 micron. It adopts ultrasonic atomization technology, which can spray the precursor solution or suspension evenly into the tube furnace for high-temperature spray pyrolysis to prepare ultra-fine powder. It is the atomization instrument in the spray pyrolysis system. The nano ultrasonic aerosol generator can be equipped with various types of flanges to connect with various tube furnaces. Using unique anti-corrosive ultrasonic atomizer   transduce, the nano ultrasonic aerosol generator can work with various strong acid precursors and organic solvents, such as nitric acid, hydrochloric acid, acetone, tetrahydrofuran and so on.   Nano ultrasonic aerosol generator is mainly used in R&D, pilot test and indust
阅读全文